Audio Lab of Georgia

10 W 2.2K OHM 5% RESISTOR 10 WATT CERMET WIREWOUND FLAMEPROOF AXIAL LEAD

Switch, Rocker Power Switch SPST 125VAC 16A Mackie SRM450V2 CARAL RH Series LECI RS606 SERIES (27.5x10.5X31MM)

PRO 12 00497070 Impedance: 8 Ohms Power capacity: 800 W Peak 400 W Program 200 W Continuous Sensitivity: 94.3 dB / 1 W 1 m Usable freq. range: 50 Hz ~ 4 kHz Cone: Kevlar® impregnated cellulose Voice coil diameter: 2.375" / 60.3 mm Voice coil material: 2 layers, thermally bonded copper wire Kapton former Nomex® stiffener Net weight lb. / kg: 9.7 lbs. / 4.4 kg Znom (ohms) 8 Revc (ohms) 6.00 Sd (Square Meters) 0.053 BL (T/M) 12.36 Fo (Hz) 48.4 Vas (liters) 86.4 Cms (uM/N) 219.7 Mms (gm) 49.10 Qms 3.84 Qes 0.588 Qts 0.510 Xmax (mm) 2.5 Le (mH) 0.72 SPL (1W 1m) 94.3 No (%) 1.73% Vd (cu. in. / ml) 16.2 / 266 Pmax (Watts pgm.) 400 Disp (cu. in. / ml) 73 / 1192 12" Packed Weight: 12.13 lb (5.5 kg) Packed Length: 14" (35.56 cm) Packed Width: 13.125" (33.34 cm) Packed Height: 6.75" (17.14 cm)

Fuse, Surface Mount, 1 A, C1F Series, 125 V, 63 V, Fast Acting, 1206

Fane Sovereign Series 10-125 Medium-power 10 inch driver, suitable as a mid/bass driver in sealed boxes and in medium-sized vented boxes as a woofer. Ideal for bass guitar in vented designs.

TIRE JVC PU51250 also for Tire Replace V-M part 3482 RCA part 78525 and other manufacturers parts used on numerous phonos of the early to mid-1950 using Alliance idler and turret drive motor systems.

18uF 100VDC 20% (10x13mm) Cap Aluminum Polymer Radial 5mm 0.03 Ohm 940mA 125c Capacitor Aluminum Polymer by Panasonic

NLA repair only Klipsch Black Bash Amp Plate Synergy Sub 12 HGB 120v Part number 1012532 replaces part 119511. (120V US version) 300 watts continuous 650 watts dynamic power Synergy Sub 12 HGB 120V Amp ON BACK ORDER 6-18-2025 They will not be making this 1012532 amp again. you can send it in for repair

Klipsch Amplifier Plate item 1066626 - SPL-120SW NA SPL120SW AMP KIT replaced by 1061068 R-112SW R1125

The original Event 1099 tweeter has been discontinued.

---

NO STOCK reference only Event Tweeter E8 P8 TR6 PS6 TR8 PS8 P9 2020 125422-1 (outside =100mm cut out=80mm) Event Tweeter used in models: Event 20/20 1099 PS6 PS 6 PS-6 Project Studio 6 TR6 TR 6 TR-6 (Event TR6 Tuned Reference Biamplifier Studio Monitors) TR8 TR 8 TR-8 ((Event TR8 Tuned Reference Biamplifier Studio Monitors) TR8XL TR 8XL TR-8XL (Event TR8XL Tuned Reference Biamplified Monitors). The original Event 1099 tweeter has been discontinued.

10W .15 OHM 5% 1

10W 250.0 OHM 1% 1

SYNERGY SUB 12 AMP 120V USE 1012532

Recone kit Eminence 12624 type woofer M&K 17110/MKV125 4 ohm

3800uv 125v radial snapin CAP